D-Link DVG-G1402S Configuration page 6

Hide thumbs Also See for DVG-G1402S:

Same Phone Number: Enabled

Phone Number: <GOtalk Username>

Display Name: <GOtalk Username> or a name to be shown while using Caller ID

Authentication Username: <GOtalk Username>

Password: <GOtalk Password>

Retype Password: <GOtalk Password>

** Please note that you can find your GOtalk Username and Password on a white sticker on the underside of the DVG-G1402S **

Once you have entered all of the above settings into the unit click on the Apply button to Save the

settings. Once again you will see the below message box appear, just click on OK.

We have now configured the unit with all the SIP Server Settings and the Phone Account Settings. The

last thing left to do is save and reboot the unit.

Saving the Settings and Restarting the Router

In order to make all of the above changes effective and save them permanently we will need to click on

Tools at the top of the page then click on Reboot from the left hand navigation bar. This will now show the

below page:

Now click on the Reboot button. This will then Save and reboot the router. You will see the below bar

while the unit is restarting, when the unit is ready it will prompt you for the Web Interface login again.

The DVG-G1402S is now setup for the VoIP account. Your unit should now be connected to the Internet

and allow for you to make VoIP Phone Calls.