Ntp Setup - Digisol DG-CD1020HC User Manual

DVR User Manual
【PPPoE setup】
Picture 4.16 PPPOE
Input the user name and password that ISP （ Internet service provider ） provides. After saving it
reboot your system. Then the DVR will build a network connection based on PPPoE. The IP address
will change into dynamic IP address after above operation is well done.
Operation：After PPPoE dialing successfully looks up the IP address in the [IP address] and obtains
the current IP address. Then use this IP address to visit the DVR through user port.

【NTP setup】

Picture 4.17 NTP
The NTP server must be installed in the PC.
Host computer IP: Input the IP address installed NTP server.
Port: Default: 123. You can set the port according to the NTP server.
Time zone: London GMT+0 Berlin GMT +1 Cairo GMT +2 Moscow GMT +3 New Delhi
GMT +5 Bangkok GMT +7 Hongkong Beijing GMT +8 Tokyo GMT +9 Sydney GMT +10
47