Digisol DG-CD1020HC User Manual page 25

DVR User Manual
Remove Preset ： Please input preset value in the blank field, click Remove Preset button, then
remove the preset points.
Remove Cruise Line ： Input the number of cruise line, click Remove Cruise Lines button, then
remove the cruise lines set.
Preset Points Blank
Cruise Button
Cruise Line Blank
Picture 3.16 Cruise Between Points Settings
2）The Calls of Cruise between Points
In Picture 3.10, click Page Shift button, enter PTZ control menu as shown in Picture 3.12. Please
input the number of cruise in the value blank, then click Cruise between Points button, PTZ begins
to work on the cruise line. Click Stop button to stop cruise.
3. Scan
PTZ also can work on the preset scan line repeatedly.
1）Scan setup
Step1：In Picture 3.10, click Setup button, enter Picture 3.14.
Step2：Click Scan button then input proper value in the scan value blank.
Step3：Click Start button, enter Picture3.10，here you can set the following items: Zoom, Focus,
Aperture, Direction and so on. Click Setup button to go back to Picture 3.14.
25