Digisol DG-CD1020HC User Manual page 36

【Interval】Only one alarm signal is turned on even when there are several motion detect signals in
the set interval.
【Alarm output】Start the external equipment of corresponding linkage alarm when the motion
detect alarm is turned on.
【Delay】Delay a few moments and stop when the alarm state is turned off. The range is 10~300
seconds.
【Record channel】Choose the recording channel (multiple option supportive). Trigger the video
signal when the alarm is turned on.
Note: Set in the [recording setup] and perform the linkage recording. Start detecting video files in
the corresponding time section.
【Tour】Means that the selective channel is single window alternate patrol preview. The interval is
set in the [Main Menu] > [System] > [Tour].
【Snapshot】Choose record channels, when alarm happens, system triggers related channels for
snapshot signal.
Note: For Snapshot activation, please go to set period, detect and alarm enable at Main
Menu->Record->Record config,
36
DVR User Manual