Operator Control; Operator Control Elements - Siemens simovert master drive Operating Instructions Manual

Types j to m dc-ac
Table of Contents

Advertisement

08.96
4

Operator control

The converter can be controlled via:
♦ the PMU (Parameterization Unit)
♦ the control terminal strip on the CU (+ section "Control terminal strip")
♦ the OP1 operator control panel (+ section "Options")
♦ the RS485 and RS232 serial interface on PMU-X300
Operator control using the PMU is described in this section.
On key
Off key
Fig. 4.1
Parameterization unit
4.1

Operator control elements

Operator control elements
P
,
P
P
+
resp.
Table 4.1
Function of the operator control elements on the PMU
Siemens AG
6SE7087-6BM70
SIMOVERT MASTER DRIVES
P
Function
Converter switch on (standard).
For faults: Return to the fault display.
Command is effective when the key is released.
Converter shutdown depending on the parameterization of OFF 1, OFF 2 or
OFF 3 (P554 to P560).
Command becomes effective when the key is released.
Field reversal / reversing for the appropriate parameterization.
Command becomes effective when the key is released.
Changeover from parameter number to parameter value. In conjunction with
other keys, additional functions (see Operating Instructions, Part 2).
Command becomes effective when the key is released.
Values (raise, lower) change as long as the keys are depressed.
Depress P and hold, then depress the second key. The command becomes
effective when the key is released (e.g. fast changeover).
+
Operating Instructions
Seven-segment displays
Reversing key
Raise key
Changeover key, operator control leve
Lower key
X300
Operator control
4-1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents