Displays - Siemens simovert master drive Operating Instructions Manual

Operator control
4.2

Displays

Basic converter
Visualization
parameters
Technology board
Basic converter
Setting
parameters
Technology board
Table 4.2 Displaying visualization- and setting parameters on the PMU
Display
Table 4.3 Status display on the PMU
The parameter description is provided in the Operating Instructions, Part 2.
4-2
Pos. actual value
Parameter value
Actual value
not possible
Parameter number
Neg. actual value
e.g e.g
Alarm
NOTE
SIMOVERT MASTER DRIVES
Index Parameter value
e.g.. e.g.
− − −
Fault
Siemens AG 6SE7087-6BM70
Operating Instructions
08.96