Table of Contents
Advertisement
CARE AND MAINTENANCE
1. Verify that the power cord is disconnected from the outlet. (fig. 1)
2. Disconnect the hose from the vacuum. (fig. 2)
3. Undo the latches and remove the power head from the collection tank. (fig. 3)
4. Clear all dirt or debris from the collection tank and hose. (fig. 4)
5. Check the hose, attachments, and power cord to verify that they have not been damaged.
IMPORTANT! Clean or change the cartridge filter regularly for best performance. ALWAYS USE
DUST FILTER FOR DRY VACUUMING. If the machine is used without the dust filter, the motor
will burn out and the warranty will be voided. Always keep spare dust filters on hand.
NOTICE! The filters included are made of high quality materials designed to stop small dust
particles. The dust filter should be used for dry pick-up only. A dry dust filter is necessary to pick up
dust. If the dust filter is wet, it will clog quickly and be difficult to clean. Handle the filter carefully
when removing it for cleaning or replacing. Check the filters for tears or small holes. A small hole
can let dust pass through and out of the cleaner. Do not use a filter with holes or tears in it; replace
it immediately.
WARNING:
ALWAYS DISCONNECT THE PLUG FROM THE POWER OUTLET BEFORE
REMOVING THE POWER HEAD FROM COLLECTION TANK.
10
Advertisement
Table of Contents
