Electrical Requirements; Warning! This Appliance Must Be Earthed - Beko CNP1601ES Manual

Electrical requirements

Before you insert the plug into the wall socket make
sure that the voltage and the frequency shown on
the rating plate inside the appliance corresponds to
your electricity supply.
Rating label is on the left hand side of fridge inner
liner.
We recommend that this appliance be connected to
the mains supply via a suitable switched and fused
socket. The appliance must be positioned so that the
plug is accessible.
WARNING
When positioning the appliance ensure the supply
cord is not trapped or damaged.
Should the mains lead of the appliance become
damaged or should it need replacing at any time, it
must be replaced by a special purpose made mains
lead which can only be obtained from a Beko
authorised service agent.

Warning! This appliance must be earthed

If the fitted moulded plug is not suitable for your
socket, then the plug should be cut off and an
appropriate plug fitted. Destroy the old plug which is
cut off as a plug with bared cord could cause a shock
hazard if inserted into a socket elsewhere in the
house.
The moulded plug on this appliance incorporates a
13 A fuse. Should the fuse need to be replaced an
ASTABEAB approved BS 1362 fuse of the same rating
must be used. Do not forget to refit the fuse cover.
In the event of losing the fuse cover the plug must
not be used until a replacement fuse cover has been
fitted.
:
7
EN