How To Set Up The Machine T-300 Unit - Air Burners T-300 Operating Manual

T-300
Air Curtain Trench Burner with Perkins 404D.22T or Kubota V2403-TE Engine
1. Once the machine is in the correct loca-
tion, first chock the wheels with suitable
blocks or wedges to keep the trailer from
moving, disconnect your tow vehicle.
Next remove the two jacks from the stor-
age box under the top cowling and fit
them to the jack points at the rear and
front of the trailer. Using the three jack
stands, level the trailer.
2. Lift the cowling of the machine and se-
cure it with an appropriate cowling sup-
port prop rod / device.
3. Check engine fluid levels, top up as nec-
essary.
4. Check drive belts (see Page 29).
5. Check PTO and fan bearings for grease,
re-grease per maintenance schedule.
6. Check engine for leaks, check for any
loose components and any obstructions
at the fan inlet.
7. Close the top cowling and secure all
latches (See Photo on right). Lock "D" lift
latch.
DANGER:
THE MACHINE MUST ONLY BE OPERATED WITH THE WHEELS
CHOCKED AND THE COWLING CLOSED AND SECURED.
IF THE MACHINE IS OPERATED WITH THE COWLING OPEN, THEN THE DRIVE
BELTS AND FAN INLET ARE UN-GUARDED, AND THERE IS THE RISK OF SERIOUS
INJURY.
HOW TO SET UP THE MACHINE
Page 8 of 34
Air Burners, Inc.
OPERATING MANUAL
"D" lift latch
Cowling Latches
(Vers. 08.16)