How To Set Up The Machine T-400 Unit - Air Burners T-400 Operating Manual

1. Once the machine is in the correct loca-
tion, first chock the wheels with suitable
blocks or wedges to keep the trailer from
moving, disconnect your tow vehicle.
Next remove the two jacks from the stor-
age box under the top cowling and fit
them to the jack points at the rear and
front of the trailer. Using the three jack
stands, level the trailer.
2. Lift the cowling of the machine and close
the optional battery isolation switch locat-
ed on one battery terminal.
3. Check engine fluid levels, top up as nec-
essary.
4. Check drive belts (see Page 29).
5. Check PTO and fan bearings for grease,
re-grease per maintenance schedule.
6. Check engine for leaks, check for any
loose components and any obstructions
at the fan inlet.
7. Close the top cowling and secure all
latches (See Photo on right). Lock "D" lift
latch.
DANGER:
THE MACHINE MUST ONLY BE OPERATED WITH THE WHEELS
CHOCKED AND THE COWLING CLOSED AND SECURED.
IF THE MACHINE IS OPERATED WITH THE COWLING OPEN, THEN THE DRIVE
BELTS AND FAN INLET ARE UN-GUARDED, AND THERE IS THE RISK OF SERIOUS
INJURY.
T-400 Air Curtain Trench Burner with Kubota V3600-TE Engine
HOW TO SET UP THE MACHINE
Page 8 of 34
Air Burners, Inc.
OPERATING MANUAL
Battery disconnect switch ( O ptional )
"D" lift latch
Cowling Latches
(Vers. 09.15)