Air Burners T-300 Operating Manual page 13

T-300
Air Curtain Trench Burner with Perkins 404D.22T or Kubota V2403-TE Engine
DANGER:
IF THE TRAILER IS NOT SET LEVEL THEN THERE IS THE RISK
THAT THE CARRIER PIPE WILL EXTEND OUT OF CONTROL AS SOON AS THE
LOCKING BOLT IS REMOVED.
DAMAGE TO THE UNIT.
8. Use the jacks to set the trailer level.
9. Remove the carrier pipe locking bolt,
use this bolt to secure the manifold in
step 12. NOTE: When the T-300 first
arrives, the locking bolt is replaced with
a "travel bolt assembly" for flatbed truck
transport. Remove this device before
first use and replace it with the locking
bolt shown here. You will find it in a
pouch in the "Black Binder" that con-
tains the Operating Manual (Shipped in
the T-300 tool box).
DANGER:
THE REAR JACK STANDS MUST BE EXTENDED BEFORE PULL-
ING THE MANIFOLD OUT, OR THE MACHINE WILL TIP BACK AND YOU COULD
BE SERIOUSLY INJURED.
10. Release the front winch and extend the
carrier pipe manually by pulling the grab
handles. Do not use any equipment or
machinery to accomplish this.
11. Extend the carrier pipe completely until
the yellow/black arrow indicator shows
full extension and you reach a hard stop.
THIS COULD CAUSE SERIOUS INJURY OR
Page 9 of 34
Air Burners, Inc.
OPERATING MANUAL
Carrier pipe locking bolt
Carrier pipe grab handles
(Vers. 08.16)