Anamorphic Lens - Optoma Home Theatre Projector User Manual

ser ontrols
"Film Mode

(48Hz)" function is
only supported under
HDMI mode.
From
I/O
46
Lamp
This function can adjust setup about lamp.
Lamp Hours: Displays the cumulative lamp operating time.

Lamp Reminding: Choose this function to show or to hide the

warning message when the changing lamp message is displayed.
The message will appear up 30 hours before suggested
replacement of lamp.
Lamp Reset: Reset the lamp life hour after replacing the lamp.

Film Mode (48Hz)
On: Enables Film Mode (48hz) function. Use this mode if the source

device is capable of outputting 24fps.
Off: Disables Film Mode (48hz).

Auto Power Off (mins)
Sets the interval of power-off of the system, if there is no signal
input. (In minutes)

Anamorphic Lens

None: No Anamorphic Lens in front of the HD81-LV.

Fixed: You have a fi xed Anamorphic Lens in front of the

HD81-LV.
Movable: You have a powered Anamorphic Lens that support

12V Trigger to control.
When Anamorphic Lens set as "Fixed" or "Movable", the default
format will become "Auto235" that replace original format
"Native". (See page 35)
Settings copy
This function allow user copy image setting that user adjust from
one to another.
Group 1 Group 2
HDMI HDMI HD 1/
1/2/3 1/2/3 HD 2
(RCA)
480i 480i
480p 480p
576i 576i
576p 576p
720p 720p
1080i/p 1080i
PC
(*) HD mean Component; PC signal only can copy to PC signal
Reset
Returns the settings for all menus to factory default values.
Group 3 Group 4
HD 3/ D-Sub HD 3/
HD 4 HD 4
(BNC) (BNC)
480i 480i
480p 480p
576i 576i
576p 576p
720p 720p
1080i 1080i
PC
Group 5
D-Sub S 1/ Video 1/
S 2/ Video 2/
S 3 Video 3
NTSC NTSC
PAL PAL
PC