Using The Remote Control - Optoma Home Theatre Projector User Manual

ser ontrols

Using the Remote Control

Power on
Standby
Brite mode
IRIS
ISF Day/ISF
Night/User1/
User2/User3
Gamma
Edge enhance
Color vivid
B/W Extension
Four Direc-
tional Select
Keys
Enter
Menu
V. Shift
Demo
26
Power on the projector. Refer to the "Power
On the Projector" section on pages 21-22.
Power off the projector. Refer to the "Power
Off the Projector" section on pages 21-22.
Increase the brightness of the image.
Refer to "IRIS" function on page 44 for
more information.
Select the display mode. Refer to "Image-->
Mode" section on page 32.
There are 10 preset gamma curves. After the
initial setup and fi ne tuning is completed,
utilize the Gamma Adjustment steps to
optimize your image output.
There are 5 pre-set modes and one user
mode for advanced edge enhancement
fi lter. You can easily switch between the
modes to achieve different effects.
There are 3 preset color management set-
tings and one user defi nable setting. You
can easily switch between the modes to
achieve different effects.
Black and White Extension can stretch the
black and white levels to automatically
increase the contrast of input image.
Use to select items or make ad-
justments to your selection.
Confi rm your item selection.
Press "Menu" to launch the on-screen
display (OSD) menu. To exit OSD, press
"Menu" again.
Shifts the projected image position verti-
cally.
This function provides the user with a pre-
view window where settings such as Edge
Enhancement, Colour Vividness and B/W
Extension can be viewed.