Optoma HD33 Operation User's Manual
  1. Manuals
  2. Brands
  3. Optoma Manuals
  4. Projector
  5. HD33
  6. Operation user's manual

Optoma HD33 Operation User's Manual

Hide thumbs Also See for HD33:
Table of Contents

Advertisement

Quick Links

Download this manual
All manuals and user guides at all-guides.com
Table of Contents ........................1
Usage Notice ...............................2
Safety Information .......................................
Precautions .................................................
Eye Safety Warnings ...................................
Introduction .................................7
Package Overview ......................................
Product Overview ........................................
Main Unit ..........................................................8
Connection Ports .............................................9
Remote Control ..............................................10
Installation .................................11
Connecting the Projector ...........................
Connect to Video .......................................
Connect to 3D Video Devices ...................
Using the 3D glasses ................................
Powering On the Projector .............................16
Powering Off the Projector .............................17
Warning Indicator ...........................................17
Adjusting the Projector's Height.....................18
Adjusting Projection Image Size ....................19
User Controls ............................20
Remote Control .........................................
On-screen Display Menus .........................
How to operate ..............................................22
Menu Tree .................................................
IMAGE ...........................................................25
IMAGE | Advanced ........................................27
IMAGE | Advanced | PureEngine ...................28
DISPLAY ........................................................31
DISPLAY | 3D ................................................33
SYSTEM ........................................................35
SYSTEM | Lamp Settings ..............................37

Table of Contents

SETUP ...........................................................38
SETUP | Signal -RGB Source........................40
SETUP | Signal -Video Source ......................41
2
Appendices ................................42
3
Troubleshooting .........................................
6
Image Problems .............................................42
Other Problems ..............................................44
7
Remote Control Problems .............................44
8
LED Lighting Messages .................................45
On Screen Messages ....................................46
Replacing the Lamp ..................................
Compatibility Modes ..................................
List .............................................................
11
RS232 Pin Assignments ................................52
11
RS232 Protocol Function List ........................53
12
Ceiling Mount Installation ..........................
13
15
Regulation & Safety Notices ......................
16
FCC Notice ....................................................59
18
20
22
23
42
47
49
52
56
57
59
1
English

Advertisement

Table of Contents
loading

Related Manuals for Optoma HD33

Summary of Contents for Optoma HD33

  • Page 1: Table Of Contents

    RS232 Protocol Function List ......53 Connect to Video ........Ceiling Mount Installation ......Connect to 3D Video Devices ....Optoma Global Offices ......Using the 3D glasses ........ Regulation & Safety Notices ...... Powering On/Off the Projector ....FCC Notice ............59 Powering On the Projector ......16...

  • Page 2: Usage Notice

    Do not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please call Optoma before you send the unit for repair. 7. Do not let objects or liquids enter the projector. They may touch danger- ous voltage points and short out parts that could result in fire or electric...

  • Page 3: Precautions

    All manuals and user guides at all-guides.com Usage Notice Precautions Please follow all warnings, precautions and mainte- nance as recommended in this user’s guide. ▀■ Do not look into the projector’s lens when the Warning- lamp is on. The bright light may hurt your eyes. When the lamp ▀■...
  • Page 4 All manuals and user guides at all-guides.com Usage Notice Turn off and unplug the power plug from the AC outlet before cleaning the product. Use a soft dry cloth with mild detergent to clean the display hous- ing. Disconnect the power plug from AC outlet if the product is not be- ing used for a long period of time.
  • Page 5 All manuals and user guides at all-guides.com Usage Notice Pregnant women, the elderly, sufferers of serious medical condi- tions, those who are sleep deprived or under the influence of alcohol should avoid utilizing the unit’s 3D functionality. If you experience any of the following symptoms, stop viewing 3D pictures immediately and consult a medical specialist: (1) altered vision;...

  • Page 6: Eye Safety Warnings

    All manuals and user guides at all-guides.com Usage Notice Eye Safety Warnings ▀■ Avoid staring/facing directly into the projector beam at all times. Keep your back to the beam as much as possible. ▀■ When projector is used in a classroom, adequately supervise students when they are asked to point out something on the screen.

  • Page 7: Introduction

    Introduction Package Overview Unpack and inspect the box contents to ensure all parts listed below are in the box. If something is missing, please contact Optoma customer service. Projector with lens cap Power Cord 1.8m Due to different applications in...

  • Page 8: Product Overview

    All manuals and user guides at all-guides.com Introduction Product Overview Main Unit Lens Cap Ventilation (outlet) Power Socket Focus Ring Input / Output Connections IR Receiver Kensington Lock Port Ventilation (inlet) Zoom Ring Tilt-Adjustment Feet Zoom Lens English...

  • Page 9: Connection Ports

    All manuals and user guides at all-guides.com Introduction Connection Ports 3D SYNC 12V Trigger Out (5V) HDMI 1 HDMI 2 VGA YPbPr Pb B Pr R VIDEO SERVICE RS-232 POWER HDMI1 Input Connector HDMI2 Input Connector VGA-In/YPbPr Connector (PC Analog Signal/Component Video Input/HDTV/YPbPr) Component Video Input Connector Composite Video Input Connector 3D Sync Out (5V) Connector...

  • Page 10: Remote Control

    All manuals and user guides at all-guides.com Introduction Remote Control Power On Power Off 16:9 Native PureEngine 3D Format Enter Re-Sync VGA Source Video Source HDMI 2 Source YPbPr Source HDMI 1 Source Menu Source Lamp Mode Contrast Brightness Mode Four Directional Select Keys English...

  • Page 11: Installation

    All manuals and user guides at all-guides.com Installation Connecting the Projector Connect to Computer/Notebook 3D Glasses +12V Output MOLEX 3D SYNC 12V Trigger Out (5V) HDMI 1 HDMI 2 Pb B Pr R VGA YPbPr VIDEO SERVICE RS-232 POWER Power Cord Due to the difference in ap- DVI/HDMI Cable *...

  • Page 12: Connect To Video

    All manuals and user guides at all-guides.com Installation Connect to Video DVD Player, Set-top Box, HDTV receiver 3D Glasses 3D SYNC 12V Trigger Out (5V) HDMI 1 HDMI 2 VGA YPbPr Pb B Pr R VIDEO SERVICE RS-232 POWER Due to the Composite Video Output difference in ap- plications for each...

  • Page 13: Connect To 3D Video Devices

    All manuals and user guides at all-guides.com Installation Connect to 3D Video Devices Once you have connected your devices together with HDMI cables, as shown in the diagram, you are ready to begin. Power ON your 3D video source and your 3D projector. The 3D video source device must be powered...
  • Page 14 All manuals and user guides at all-guides.com Installation 3D Broadcast 3D Blu-ray™ Disc 3D Console Games SKY+HD, cable/satellite 3D Blu-ray™ Player PlayStation ® 3D Glasses Full 3D 1080p DLP ® Projector All other product names, company names and trade names used herein are for identifications purposes only and may be trademarks or registered trademarks of their respective owners.

  • Page 15: Using The 3D Glasses

    All manuals and user guides at all-guides.com Installation Using the 3D glasses To turn ON 3D glasses: Press the “Power” button and the LED will flash For more detailed one time indicating the glasses are ready to use 3D mode. information, please refer to Verify that 3D content is being sent to the projector and signal is compat-...

  • Page 16: Powering On/Off The Projector

    All manuals and user guides at all-guides.com Installation Powering On/Off the Projector Powering On the Projector 1. Remove the lens cap. 2. Securely connect the power cord and signal cable. When con- nected, the Power LED will turn red. 3. Turn on the lamp by pressing “POWER” button on the back of the projector or pressing “...

  • Page 17: Powering Off The Projector

    Warning Indicator When the “LAMP” indicator is lit orange, the projector will shut down automatically. Please call the nearest Optoma facility for assistance. When the “TEMP” indicator turns red, it indicates the projector has overheated. The projector will shut down automatically.

  • Page 18: Adjusting The Projected Image

    All manuals and user guides at all-guides.com Installation Adjusting the Projected Image Adjusting the Projector’s Height The projector is equipped with elevator feet for adjusting the image height. Locate the adjustable foot you wish to modify on the underside of the projector.

  • Page 19: Adjusting Projection Image Size

    All manuals and user guides at all-guides.com Installation Adjusting Projection Image Size Top View Screen Screen (W) Projection Distance (D) Width Screen (H) Screen Side View Offset (Hd) Projection Distance (D) Screen Size W x H Projection Distance (D) Diagonal length Offset (Hd) (inch) size of (feet)

  • Page 20: User Controls

    All manuals and user guides at all-guides.com User Controls Remote Control Using the Remote Control Power On Turn on the projector. Power Off Turn off the projector. Lamp Mode Increase the brightness of the image. Select the display mode from Cinema, Mode Bright, Photo, Reference, 3D, ISF Day, ISF...
  • Page 21 All manuals and user guides at all-guides.com User Controls Using the Remote Control Enter Confirm your item selection. Source Press “Source” to select an input signal. Automatically synchronizes the projector to Re-sync the input source. Display or exit the on-screen display menus Menu for projector.

  • Page 22: On-Screen Display Menus

    All manuals and user guides at all-guides.com User Controls On-screen Display Menus The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1.

  • Page 23: Menu Tree

    All manuals and user guides at all-guides.com User Controls Menu Tree Main Menu Sub Menu Settings Display Mode Cinema / Bright / Photo / Reference / 3D / IMAGE ISF Day / ISF Night / User Contrast -50~50 Brightness -50~50 Sharpness 0~15 Color...
  • Page 24 All manuals and user guides at all-guides.com User Controls Main Menu Sub Menu Settings Language SETUP English / Deutsch / Français / Italiano / Español / Português / Svenska / Nederlands / Norsk/Dansk / Polski / / Suomi / / Magyar / ýeština / / Türkçe / Input Source...

  • Page 25: Image

    All manuals and user guides at all-guides.com User Controls IMAGE Display Mode There are many factory presets optimized for various types of “ISF Day” and images. “ISF Night” will Cinema: For home theater. not be shown Reference: This mode is intended to reproduce, as close when the ISF as possible, the image the way the movie director intended.
  • Page 26 All manuals and user guides at all-guides.com User Controls Press the ◄ to decrease the contrast. Press the ► to increase the contrast. “Color” and “Tint” Brightness are only support- Adjust the brightness of the image. ed for composite Press the ◄ to darken image. and component sources.

  • Page 27: Image | Advanced

    All manuals and user guides at all-guides.com User Controls IMAGE | Advanced Noise Reduction The Noise Reduction reduces the amount of visible noise inter- laced signals. The range is from “0” to “10”. (0: Off) Gamma This allows you to set up gamma curve type. After the initial setup and fine tuning is completed, utilize the Gamma Adjustment steps to optimize your image output.

  • Page 28: Image | Advanced | Pureengine

    All manuals and user guides at all-guides.com User Controls IMAGE | Advanced | PureEngine PureDetail PureDetail is an edge enhancement tool that enables the edges in the projected image is be enhanced thus providing more per- ceived detail. PureColor This adjustable item utilizes a new color-processing algorithm and enhancements to enable the picture’s vividness to be significantly increased.

  • Page 29: Image | Advanced | Color Settings

    All manuals and user guides at all-guides.com User Controls IMAGE | Advanced | Color Settings Color Temperature If set to cold temperature, the image looks more blue. (cold im- age) If set to warm temperature, the image looks more red. (warm im- age) RGB Gain/Bias Press ►...
  • Page 30 All manuals and user guides at all-guides.com User Controls Color Space Select an appropriate color matrix type from AUTO, RGB, RGB(0-255) RGB(16-235) or YUV. (*) For HDMI only. English...

  • Page 31: Display

    All manuals and user guides at all-guides.com User Controls DISPLAY Format Use this function to choose your desired aspect ratio. 4:3: This format is for 4x3 input sources. 16:9: This format is for 16x9 input sources, like HDTV and DVD enhanced for Widescreen TV. LBX: This format is for non-16x9, letterbox source and for us- ers who use external anamorphic lens to display 2.35:1 aspect ratio using full resolution.
  • Page 32 All manuals and user guides at all-guides.com User Controls 16:9 Screen 480i/p 576i/p 1080i/p 720p 1440 x 1080 center 16:9 1920 x 1080 center 1920 x 1440 center, then get the central 1920 x 1080 image to display No resize image, 1:1 mapping and centered. This format Native shows original image without scaling.

  • Page 33: Display | 3D

    All manuals and user guides at all-guides.com User Controls DISPLAY | 3D 3D Mode DLP Link: Select “DLP Link” to use optimized settings for DLP Link 3D Glasses. (please refer to page 15). VESA 3D: Select “VESA 3D” to use optimized setting for VESA 3D Glasses.
  • Page 34 All manuals and user guides at all-guides.com User Controls 3D Sync. Invert “3D sync. Invert” Press the “On” to invert left and right frame contents. function wouldn’t save the setting. Press the “Off” for default frame contents. It will set to “Off” when powers on and changes source.

  • Page 35: System

    All manuals and user guides at all-guides.com User Controls SYSTEM Menu Location Choose the menu location on the display screen. Rear-Desktop Lamp Setting and Rear-Ceiling Press ► into the next menu and then use ▲ or ▼ to select item. are to be used with a translucent Projection...
  • Page 36 All manuals and user guides at all-guides.com User Controls Background Color Use this feature to display a “Blue”, “Black”, or “Gray” screen when no signal is available. 12V Trigger Press the “Off” to disable the trigger. Press the “On” to enable the trigger and the programmable sub-menu.

  • Page 37: System | Lamp Settings

    All manuals and user guides at all-guides.com User Controls SYSTEM | Lamp Settings Lamp Hour Display the cumulative lamp operating time. Lamp Reminder Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear up 30 hours before suggested replacement of lamp.

  • Page 38: Setup

    All manuals and user guides at all-guides.com User Controls SETUP Language Choose the multilingual OSD menu. Press ◄ or ► into the sub menu and then use the ▲ or ▼ to select your preferred language. Press “Select (Enter)” to finalize the selection. Input Source Use this option to enable / disable input sources.
  • Page 39 All manuals and user guides at all-guides.com User Controls Source Lock On: The projector will only search current input connection. Off: The projector will search for other signals if the current input signal is lost. High Altitude Choose “On” to turn on High Altitude mode. Operates the fans at full speed continuously to allow for proper high altitude cooling of the projector.

  • Page 40: Setup | Signal -Rgb Source

    All manuals and user guides at all-guides.com User Controls SETUP | Signal -RGB Source Frequency “Signal” is only supported in Ana- Change the display data frequency to match the frequency of your log VGA (RGB) computer’s graphic card. Use this function only if the image ap- signal.

  • Page 41: Setup | Signal -Video Source

    All manuals and user guides at all-guides.com Appendices SETUP | Signal -Video Source White Level “Signal” is not supported when Allow user adjust White Level when inputting S-Video or Video/ the source is CVBS signals. HDMI or DVI-D. Black Level “IRE”...

  • Page 42: Appendices

    All manuals and user guides at all-guides.com Appendices Troubleshooting If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service center. Image Problems No image appears on-screen Ensure all the cables and power connections are correctly and securely connected as described in the “Installation”...
  • Page 43 All manuals and user guides at all-guides.com Appendices Image has slanted sides: If possible, reposition the projector so that it is centered on the screen and below the bottom of the screen. Use “Display-->V Keystone” from the OSD to make an adjust- ment.

  • Page 44: Other Problems

    All manuals and user guides at all-guides.com Appendices Other Problems The projector stops responding to all controls If possible, turn off the projector, then unplug the power cord and wait at least 20 seconds before reconnecting power. Lamp burns out or makes a popping sound When the lamp reaches its end of life, it will burn out and may make a loud popping sound.

  • Page 45: Led Lighting Messages

    All manuals and user guides at all-guides.com Appendices LED Lighting Messages Power LED Power LED Temp LED Lamp LED Message (Red) (Blue) (Red) (Orange) Power LED on: Standby State Steady light No signal; OSD (Input power cord) menu appears Power on (Warming) Flashing and signal had been detected.

  • Page 46: On Screen Messages

    All manuals and user guides at all-guides.com Appendices On Screen Messages Power down timer active: Lamp warning: Power off: English...

  • Page 47: Replacing The Lamp

    All manuals and user guides at all-guides.com Appendices Replacing the Lamp The projector automatically detects the lamp life. When the lamp life is nearing the end of use, you will receive a warning message. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible.
  • Page 48 All manuals and user guides at all-guides.com Appendices The projector can- not be turned on if the lamp cover has not been placed back on the projector. Do not touch the glass area of the lamp. Hand oil can cause the lamp to shatter.

  • Page 49: Compatibility Modes

    All manuals and user guides at all-guides.com Appendices Compatibility Modes Computer Compatibility for PC Frequency H. Refresh Rate Signal Resolution Video Digital Analog (KHz) (Hz) NTSC 15.734 15.625 720 x 400 31.5 PAL/SECAM 720 x 400 37.9 720 x 576 640 x 480 31.5 640 x 480...
  • Page 50 All manuals and user guides at all-guides.com Appendices Frequency H. Refresh Rate Signal Resolution Video Digital Analog (KHz) (Hz) 1920 x 1080i 1920 x 1080i 1920 x 1080p 1920 x 1080p HDTV 1920 x 1080p 1280 x 720 1280 x 720p 1280 x 720p 720 x 576 31.3...
  • Page 51 All manuals and user guides at all-guides.com Appendices 3D Input Video Compatibility Input Timing 1280 x 720p @ 50Hz Top-and-Bottom 1280 x 720p @ 60Hz Top-and-Bottom 1280 x 720p @ 50Hz Frame packing HDMI 1.4a 3D 1280 x 720p @ 60Hz Frame packing Input 1920 x 1080i @ 50 Hz...

  • Page 52: Rs232 Commands And Protocol Function List

    All manuals and user guides at all-guides.com Appendices RS232 Commands and Protocol Function List RS232 Pin Assignments Pin no. Name I/O (From Projector Side) Signal Ground English...

  • Page 53: Rs232 Protocol Function List

    All manuals and user guides at all-guides.com Appendices RS232 Protocol Function List Optoma Data and HT Projectors HD33 Baud Rate 9600 Note: There is a <CR> after all ASCII commands, 0D is the HEX code for <CR> in ASCII code...
  • Page 54 = Display mode None Cinema Bright Movie sRGB User(1) User2 ISF Day ISF Nigh Model Name ~XX151 n a=1 HD83 a=2 HD33 Depends a=0/1/2 RS232 Version No ~XX152 n Depends a=?? a=0/2//5//7/8/11 None/VGAVideo/HDMI1/HD Input Source Commands MI2/Component ~XX121 n...
  • Page 55 ~XX128 n Warm/Medium/Cold a=0/1/2/3 for Front- Front-Desktop Rear- Desktop/Rear-Desktop Desktop Front-Ceiling /Front-Ceiling/Rear- Rear-Ceiling Ceiling Projection Mode ~XX129 n RS232 Commands for HD33 Remote Remote Control Up/Page + n=10 ~XX140 n Left/Source n=11 Enter (for projection MENU) n=12 Right/Re-SYNC n=13 Down/Page -...

  • Page 56: Ceiling Mount Installation

    All manuals and user guides at all-guides.com Appendices Ceiling Mount Installation To prevent damage to your projector, please use the Optoma ceil- ing mount. If you wish to use a third party ceiling mount kit, please ensure the screws used to attached a mount to the projector met the follow- ing specifications:...

  • Page 57: Optoma Global Offices

    All manuals and user guides at all-guides.com Appendices Optoma Global Offices For service or support please contact your local office. 3178 Laurelview Ct. 888-289-6786 Fremont, CA 94538, USA 510-897-8601 www.optomausa.com services@optoma.com Canada 2420 Meadowpine Blvd., Suite #105 888-289-6786 Mississauga, ON, L5N 6S2, Canada 510-897-8601 www.optoma.ca...
  • Page 58 All manuals and user guides at all-guides.com Appendices Deutschland Wiesenstrasse 21 W +49 (0) 211 506 6670 D40549 Düsseldorf, +49 (0) 211 506 66799 Germany info@optoma.de Scandinavia Lerpeveien 25 +47 32 98 89 90 3040 Drammen +47 32 98 89 99 Norway info@optoma.no PO.BOX 9515...

  • Page 59: Regulation & Safety Notices

    All manuals and user guides at all-guides.com Appendices Regulation & Safety Notices This appendix lists the general notices of your projector. FCC Notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 60: Declaration Of Conformity For Eu Countries

    All manuals and user guides at all-guides.com Appendices Declaration of Conformity for EU countries EMC Directive 2004/108/EC (including amendments) Low Voltage Directive 2006/95/EC R & TTE Directive 1999/5/EC (if product has RF function) Disposal instructions Do not throw this electronic device into the trash when discarding.

Table of Contents