Changing The Player Settings - Panasonic DVD-S77 Operating Instructions Manual

RQT8087-En.fm Page 20 Monday, February 21, 2005 2:34 PM

Changing the player settings

1
SETUP
Shows Setup menu.
≥ The settings remain intact even if you switch the unit to standby.
≥ Underlined items are the factory preset.
QUICK SETUP enables successive settings of the items in the shaded area.
∫ "Disc" tab
Audio English
Choose the audio
Other
language.
Subtitle Automatic
Choose the subtitle
Other
language.
Menus
English
≥ Changing the menu language from QUICK SETUP also
Choose the language for
disc menus. changes this setting.
Ratings Setting ratings (When level 8 is selected)
8 No Limit
Set a ratings level to
0 Lock All: To prevent play of discs without ratings levels.
limit DVD-Video play.
When setting a ratings level, a password screen is shown.
≥ Follow the on-screen
Follow the on-screen instructions.
instructions.
Do not forget your password.
A message screen will be shown if a DVD-Video exceeding
the ratings level is inserted in the unit. Follow the on-screen
instructions.
∫ "Video" tab
TV Aspect 4:3 Pan&Scan: Regular aspect television (4:3)
The sides of the widescreen picture are cut off so
Choose the setting to
it fills the screen (unless prohibited by the disc).
suit your television and
4:3 Letterbox: Regular aspect television (4:3)
preference.
Widescreen picture is shown in the letterbox
style.
16:9: Widescreen television (16:9)
TV Type Standard (Direct View TV)
LCD TV/Projector
Select to suit the type of
Plasma TV
television.
Time Delay 0ms
80ms
When connected with an
Downloaded From DvDPlayer-Manual.com Panasonic Manuals
AV amplifier and Plasma
display, adjust if you
notice the audio is out of
2
Select
ENTER
Go right
Select the tab.
French Spanish
¢¢¢¢
§2
§3
English French
¢¢¢¢
§2
French Spanish
1 to 7
CRT Projector
Projection TV
20ms 40ms 60ms
100ms
3
Select
ENTER
Register
Select the item.
Still Mode
Specify the type of picture
§1
Original
shown when paused.
Spanish
Black Level Control
Change the black level of the
picture if you connected a
¢¢¢¢
§2
Other
television through the
COMPONENT VIDEO OUT
terminals.
∫ "Audio" tab
PCM Digital Output
Check the digital input
limitations of the
equipment you connect
using COAXIAL or
OPTICAL terminal and
select the maximum
sampling frequency of
PCM digital output.
Dolby Digital
With COAXIAL,
OPTICAL or HDMI AV
OUT connections
( page 7, 8)
DTS Digital Surround
With COAXIAL,
OPTICAL or HDMI AV
OUT connections
( page 7, 8)
4
Select
1 2 3
4 5 6
ENTER
7 8 9
Register
0 10
Make the settings.
Automatic
Field: The picture is not blurred, but picture quality is
lower.
Frame: Overall quality is high, but the picture may appear
blurred.
Lighter: When connected through VIDEO OUT or
S VIDEO OUT.
Darker: When connected through COMPONENT
VIDEO OUT.
Off: When not connected with COAXIAL or OPTICAL
terminal.
Up to 48 kHz: When connected to equipment compatible
with 44.1 or 48 kHz
Up to 96 kHz: When connected to equipment compatible
with 88.2 or 96 kHz
Up to 192 kHz: When connected to equipment compatible
with 176.4 or 192 kHz.
≥Signals from copy-protected discs are converted to 48 or
44.1 kHz.
≥Some equipment cannot handle sampling frequencies of
88.2 kHz, even if they can handle 96 kHz. Read your
equipment's operating instructions for details.
Bitstream Select "Bitstream" when the equipment
can decode the bitstream (digital form of
PCM
multi-channel data). Otherwise, select
"PCM". (If the bitstream is output to the
equipment without a decoder, high levels of
noise can be output and may damage your
Bitstream
speakers and hearing.)
PCM
When audio is output from HDMI AV OUT
terminal, and the connected equipment
does not support the item selected, the
actual output will depend on the
5
SETUP
Press to exit.