Changing The Player Settings - Panasonic DVD-K32 Operating Instructions Manual

Changing the player settings

1
SETUP
Shows Setup menu.
≥ Referring to page 14 to 15, change as required.
≥ The settings remain intact even if you switch the unit to standby.
≥ Underlined items are the factory preset.
∫ "DISC" tab
SETTING STATE Display the current setting of the items below
AUDIO ENGLISH
Choose the audio
OTHER----
language.
SUBTITLE
AUTO
Choose the subtitle
OTHER----
language.
MENUS ENGLISH
Choose the
language for disc
menus.
RATINGS Setting ratings (When level 8 is selected)
0 LOCK ALL: To prevent play of discs without ratings levels.
Set a ratings level to
1 to 7:
limit DVD-Video play.
8 NO LIMIT
When setting a ratings level, a password screen is shown.
Enter the password with [3 4] and [1], then press [ENTER].
Do not forget your password.
A message screen will be shown if a DVD-Video exceeding
the ratings level is inserted in the unit. Follow the on-screen
instructions.
PASSWORD 1 Select "CHANGE" and press [ENTER].
2 Enter the current password with [3 4] and [1], then press
Change the
[ENTER].
password for
3 Enter the new password with [3 4] and [1], then press
"RATINGS"
[ENTER].
(➜ above).
If "VERIFY" is displayed, please verify the password and
14
insert it again.
2
Select
Register
Select the tab.
§1
(LANGUAGE OPTIONS)
§3
§4
ENGLISH (LANGUAGE OPTIONS)
§3
§1
(LANGUAGE OPTIONS) OTHER----
To prohibit play of DVD-Video with
corresponding ratings recorded on them.
3
Select
Register
Select the item.
∫ "VIDEO" tab
SETTING STATE
TV ASPECT
Choose the setting to suit
your television and
preference. (➜ page 7,
§2
ORIGINAL
Selecting aspect ratio)
TV TYPE
Select to suit the type of
television.
§1
NTSC DISC OUT
Choose PAL60 or NTSC
output when playing NTSC
§3
discs.
STILL MODE
Specify the type of picture
shown when paused.
VIDEO OUT-SCART
Choose the video signal format to
be output from the SCART and
COMPONENT VIDEO OUT
terminals (➜page 5)
BLACK LEVEL
Change the black level of
the picture if you connected
a television through the
COMPONENT VIDEO
OUT terminals.
VIDEO OUT (I/P)
Select "PROGRESSIVE"
only if connecting to a
progressive output
compatible television.
4 5
Select
Register
Make the settings.
Display the current setting of the items below
4:3PAN&SCAN 4:3LETTERBOX
4:3ZOOM 16:9NORMAL
16:9SHRINK 16:9ZOOM
STANDARD
LCD
PLASMA
§5,6,7
NTSC: Output signals from NTSC discs remain as
NTSC.
PAL60: NTSC disc can be viewed on PAL television.
[Asia]: "NTSC" is the factory preset.
AUTO
FIELD: The picture is not blurred, but picture quality is lower.
FRAME: Overall quality is high, but the picture may
appear blurred.
§5 VIDEO/YPbPr
S-VIDEO/YPbPr
RGB/NO OUTPUT
§8
LIGHTER: When connected through VIDEO OUT or
S VIDEO OUT.
DARKER: When connected through COMPONENT
VIDEO OUT.
INTERLACE PROGRESSIVE
When you select "PROGRESSIVE", a message screen
will appear.
≥ For progressive output, press [3] and then press
[ENTER].
≥ Press [RETURN] to cancel.
SETUP
Press to exit.
CRT
PROJECTION