Changing The Player Settings - Panasonic DVD-S52 Operating Instructions Manual

Changing the player settings

1
SETUP
Shows Setup menu.
≥ Referring to pages 20 to 22, change as required.
≥ The settings remain intact even if you switch the unit to standby.
≥ Underlined items are the factory preset.
QUICK SETUP enables successive settings of the items in the shaded area.
∫ "Disc" tab
Audio English
Choose the audio
Other
language.
Subtitle Automatic
Choose the subtitle
Other
language.
Menus
English
Choose the language ≥ Changing the menu language from QUICK SETUP also
for disc menus.
changes this setting.
Advanced Disc Review Intro Mode: Reviews each title/program.
Select how to review Interval Mode: Reviews each 10 minutes.
(➜ page 11).
Ratings Setting ratings (When level 8 is selected)
Set a ratings level to 8 No Limit
limit DVD-Video play. 1 to 7:
≥ Follow the on-
0 Lock All: To prevent play of discs without ratings levels.
screen instructions.
When setting a ratings level, a password screen is shown.
Follow the on-screen instructions.
Do not forget your password.
A message screen will be shown if a DVD-Video exceeding the
ratings level is inserted in the unit. Follow the on-screen instructions.
§1
The original language designated on the disc is selected.
§2
Input a code number referring to the table (➜ page 22).
§3
If the language selected for "Audio" is not available, subtitles appear in that language
(If available on the disc).
20
2
Select
ENTER
Go right
Select the tab.
French Spanish
¢¢¢¢
§2
§3
English French
¢¢¢¢
§2
French Spanish Other
To prohibit play of DVD-Video with
corresponding ratings recorded on them.
3
Select
ENTER
Register
Select the item.
∫ "Video" tab
TV Aspect
Choose the setting to suit
your television and
preference.
§1
Original
Spanish
TV Type
Select to suit the type of
¢¢¢¢
§2
television.
Time Delay
When connected with an AV
amplifier and Plasma display,
adjust if you notice the audio is
out of sync with the video.
Still Mode
Specify the type of picture
shown when paused.
Black Level Control
Change the black level of
the picture if you connected
a television through the
COMPONENT VIDEO OUT
terminals.
4
Select
1 2 3
4 5 6
ENTER
7 8 9
Register
0 10
Make the settings.
4:3 Pan&Scan: Regular aspect
television (4:3)
The sides of the widescreen picture are
cut off so it fills the screen (unless
prohibited by the disc).
4:3 Letterbox: Regular aspect television (4:3)
Widescreen picture is shown in the
letterbox style.
16:9: Widescreen television (16:9)
Standard (Direct View TV)
LCD TV/Projector
Plasma TV
0ms 20ms
80ms 100ms
Automatic
Field: The picture is not blurred, but picture
quality is lower.
Frame: Overall quality is high, but the picture may
appear blurred.
Lighter: When connected through VIDEO OUT or
S VIDEO OUT.
Darker: When connected through COMPONENT
VIDEO OUT.
≥ This setting is irrelevant when connected through
the HDMI AV OUT terminal.
5
SETUP
Press to exit.
CRT Projector
Projection TV
40ms 60ms