Remove Cover Hood And Heat Insulation - Rotex HPSU compact (V5) Installation And Maintenance Manual

4 x Set-up and installation
4.3

Remove cover hood and heat insulation

Lift the cover hood at the back and remove to the front.
Fig. 4-6 Removing the protective cover
Fig. 4-7 ROTEX HPSU compact without cover hood
CAUTION!
The thermal insulation (fig. 4-7, item A)
consists of pressure sensitive shaped
EPP components that can easily be
damaged by inappropriate handling.
Carry out removal of the thermal
insulation only in the sequence and in
the directions quoted below.
Do not use force.
Do not use tools.
22
A
Remove the top thermal insulation in the following order:
– Pull away the side insulation element (fig. 4-8, item A)
horizontally.
– Pull away the rear insulation element (fig. 4-8, item B) hor-
izontally.
– Pull away the front insulation element (fig. 4-8, item C)
horizontally.
B
Fig. 4-8 Removing top thermal insulation
If required: Remove the bottom thermal insulation in the
following order:
– Pull away the side insulation element (fig. 4-9, item A) ver-
tically.
– Pull away the rear insulation element (fig. 4-9, item B) ver-
tically.
B
A
Fig. 4-9 Removing bottom thermal insulation
Installing the thermal insulation is carried out in the
reverse order.
FA ROTEX HPSU compact (V5) •
C
A