Printing On Both Sides Of The Paper; Automatic 2-Sided Printing Guidelines - Xerox Phaser 7400DN User Manual

Printing on Both Sides of the Paper

This section includes:
■
■
■
Note:
www.xerox.com/office/7400support.

Automatic 2-Sided Printing Guidelines

Automatic two-sided printing is available from all trays. Before printing a two-sided
document, verify the following requirements:
■
■
The following paper and media cannot be used for 2-sided printing:
■
■
■
■
■
■
See also:
Downloaded From ManualsPrinter.com Manuals
Automatic 2-Sided Printing Guidelines
Binding Edge Options on page 3-30
Selecting 2-Sided Printing
For information about manual two-sided printing, go to the Knowledge Base at
You must have a Phaser 7400DN, Phaser 7400DT, Phaser 7400DX, or Phaser 7400DXF
printer.
The paper you are using must be within the following ranges:
2
■ Weight: 75–188 g/m
■ Length: 148–456 mm (5.83–17.95 in.)
Transparencies
Envelopes
Labels
Card stock
Glossy paper
Media that is heavier than 188 g/m
Options on page 1-5
Supported Paper and Media
on page 3-29
on page 3-30
(20–50 lb. Bond)
2
(28 lb. Bond)
on page 3-3
Phaser® 7400 Color Printer
3-29
Printing on Both Sides of the Paper