Configuring Connection To The Internet; Wan Connection - D-Link DSL-2750U Quick Installation Manual

DSL-2750U/NRU
The web-based interface of the router is bilingual (English/Russian). Select a
needed language from the menu displayed when the mouse pointer is over the
Language caption. You can change the language of the web-based interface
in any menu item.

Configuring Connection to the Internet

You should configure your WAN connection in accordance with data
!
provided by your Internet service provider (ISP). Make sure that you
have obtained all necessary information prior to configuring your WAN
connection. Otherwise contact your ISP.
3G WAN Connection
If the PIN code check is enabled for the SIM card inserted into your USB modem,
then prior to creating a 3G WAN connection, proceed to the USB modem menu
and enter the PIN code on the page displayed.
1. Go to the Net / Connections page and click the Add button.
2. In the General settings section, specify a name for your connection
(any name for easier identification) in the Name field and select the 3G
value from the Connection Type drop-down list.
3. In the Physical layer section, select the usb value from the Physical
interface drop-down list.
Quick Installation Guide
8