Configuring Connection To The Internet; Wan Connection - D-Link DSL-2750U Quick Installation Manual

DSL-2750U

Configuring Connection to the Internet

You should configure your WAN connection in accordance with data
!
provided by your Internet service provider (ISP). Make sure that you
have obtained all necessary information prior to configuring your WAN
connection. Otherwise contact your ISP.
3G WAN Connection
If the PIN code check is enabled for the SIM card inserted into your USB
modem, then prior to creating a 3G WAN connection, proceed to the USB
modem menu and enter the PIN code on the page displayed
1. Go to the Net / WAN page and click the Add button.
2. In the General settings section, from the Provider drop-down list,
select your country and operator to automatically specify all settings
required to connect to the Internet. To specify all settings independently,
leave the Manually value.
From the Connection Type drop-down list, select the 3G value.
3.
Make sure that the usb value is selected from the Interface drop-down
4.
list.
5 For GSM USB modems only. For CDMA USB modems, it is required to disable the
PIN code check on the identification card prior to connecting the USB modem to the
router.
Quick Installation Guide
5 .
17