D-Link DSL-2750U Quick Installation Manual page 12

DSL-2750U/NRU
5. In the Physical layer section, select the value corresponding to the
LAN port that will be used as the WAN port from the Physical
interface drop-down list.
6. In the IP settings section, fill in the IP Address, Netmask, and
Gateway IP Address fields for the Static IP type. Select the Obtain
an IP address automatically checkbox for the DHCP type.
7. For the PPPoE connection type, enter authorization data provided by
your ISP in the PPP Settings section (the username (login) in the PPP
Username field and the password in the Password and Password
confirmation fields). If these data have not been provided by your ISP,
select the Without authorization checkbox.
8. Deselect the NAT checkbox in the Miscellaneous section if your ISP
requires you to disable the network address translation function.
9. Click the Save button.
Quick Installation Guide
12