Configuring Connection To The Internet; Lte Wan Connection - D-Link DIR-620 Quick Installation Manual

DIR-620

Configuring Connection to the Internet

You should configure your WAN connection in accordance with data
!
provided by your Internet service provider (ISP). Make sure that you
have obtained all necessary information prior to configuring your
connection. Otherwise contact your ISP.

LTE WAN Connection

If the PIN code check is enabled for the SIM card inserted into your LTE USB
modem, it is required to disable the PIN code check on the identification card
prior to connecting the USB modem to the router.
An active LTE WAN connection will be automatically created on the Net /
WAN page when connecting a USB modem to the router. If the connection has
not been created automatically, create a new connection manually.
!
For the USB modem Megafon M100-1, please reboot the router after
creating the WAN connection.
1. Go to the Net / WAN page and click the Add button.
2. In the General settings section, in the Provider drop-down list, leave
the Manually value.
3. From the Connection Type drop-down list, select the LTE value.
4. Make sure that the USB value is selected from the Interface drop-down
list.
5. Specify a name for your connection (any name for easier identification) in
the Name field.
Quick Installation Guide
18