Rec Quality/ Continuous Af/ Wind Cut - Panasonic DMC-ZS3 Operating Instructions Manual

Using REC/MOTION PICTURE menu
(Continued)
REC/PLAY switch:
Sets the picture quality of the motion picture that is recorded.
MODE:
Settings:
'AVCHD Lite' in REC MODE
Setting
SH
H
L
'MOTION JPEG' in REC MODE
Setting
HD
WVGA
VGA
QVGA
1 The bit rate is the amount of data per unit time. A higher value translates into a higher image
quality. This camera uses the VBR (Variable Bit Rate) recording system and the available recording
time is shorter when recording a subject with rapid movements.
2 The frame rate is the number of frames per second.
'WVGA' cannot be set in INTELLIGENT AUTO Mode.
'QVGA' only can be recorded to the built-in memory.
Either allow the focus to be constantly adjusted during motion picture recording, or fix the
focus position at the start of recording.
MODE:
Settings: ON: Adjust focus according to movement of subject during motion
OFF: Fix focus position at the start of motion picture recording.
Reduces recording of wind sounds (wind noise) when recording in a strong wind
MODE:
Settings: OFF/ON (
When WIND CUT is set to 'ON', lower sounds will be eliminated and the sound quality
will differ from that of normal recordings.
Downloaded From camera-usermanual.com Panasonic Manuals
80
VQT1Z82
→ MOTION PICTURE menu
→ REC menu
Resolution
1280 x 720
1280 x 720
1280 x 720
Resolution
1280 x 720
848 x 480
640 x 480
320 x 240
CONTINUOUS AF
→ MOTION PICTURE menu
→ REC menu
picture recording.
Use this setting to keep the same focus position for subjects with little
forward/backward movement.
WIND CUT
→ MOTION PICTURE menu
appears on the screen.)
WIND CUT is not available in the DMC-ZS1.
See P.18 for menu setting procedure.
REC QUALITY
Bit rate
17 Mbps
13 Mbps
9 Mbps
/
Frame rate
30 fps
30 fps
30 fps
30 fps
( appears on the screen.)
1
Aspect ratio
16:9
2 Aspect ratio
16:9
4:3