Copying Still Pictures And Motion Pictures - Panasonic DMC-ZS3 Operating Instructions Manual

Some computers can read directly from the camera's memory card.
For details, see the manual for your computer.
Set-up:
• Use a fully charged battery, or connect the AC adaptor (DMW-AC5PP, sold separately)
and Multi Conversion Adaptor (DMW-MCA1, sold separately). (P.103)
• Card
Built-in memory: Remove card
ACCESS (sending data)
• Do not disconnect the USB connection
cable while 'ACCESS' is displayed.
Turn on power of both
camera and computer
Connect camera to
computer
Please make sure you use the
supplied USB connection cable.
Use of cables other than the supplied
USB connection cable may cause
malfunction.
To cancel connection
Downloaded From camera-usermanual.com Panasonic Manuals

Copying still pictures and motion pictures

: Insert card and set mode dial to any except
Check socket direction and insert straight in.
(Damage to socket shape can lead to faulty operation.)
Click 'Safely Remove Hardware' in the Windows
System Tray → disconnect USB connection cable
→ turn off camera power → disconnect AC adaptor
USB connection cable
(always use cable supplied)
Select 'PC' on the camera
A message may be displayed on screen
if 'USB MODE' (P.24) is set to 'PictBridge
(PTP)'. Select 'CANCEL' to close the
screen, and set 'USB MODE' to 'PC'.
Operate with your
computer
101
VQT1Z82