Taking Pictures/Motion Pictures With Exposure Compensation; Auto Bracket (Pictures Only) - Panasonic DMC-ZS3 Operating Instructions Manual

Taking pictures/motion pictures with exposure
compensation
Mode:
Corrects exposure when adequate exposure cannot be obtained (if difference between
brightness of object and background, etc.). Depending on the brightness, this may not be
possible in some cases.
Display 'EXPOSURE'
Select a value
'0' (no compensation)
Takes 3 pictures in succession, changing the exposure. After exposure compensation, the
compensation value is as standard.
Display 'AUTO BRACKET'
Press ▲ twice to switch
'EXPOSURE' to
'AUTO BRACKET'.
Select a value
'0' (no compensation)
Value displayed after exposure compensation set
Cannot be used with flash or when there is remaining capacity for only 2 more pictures.
When 'AUTO BRACKET' is set,
Canceled when the power is turned off.
When AUTO BRACKET is set, 'MULTI ASPECT'
AUTO BRACKET cannot be set in 'TRANSFORM', 'PANORAMA ASSIST', 'HI-SPEED
BURST', 'FLASH BURST', 'STARRY SKY', 'PIN HOLE', and 'FILM GRAIN' scene modes.
Exposure compensation cannot be used with the 'STARRY SKY' scene mode.
Downloaded From camera-usermanual.com Panasonic Manuals
EXPOSURE

AUTO BRACKET (Pictures only)

is displayed on the left of the screen.
Example of exposure compensation
Over-exposed
Minus direction
Optimum exposure
Plus direction
Under-exposed
e.g. AUTO BRACKET with ±1EV
First picture
0EV
(Standard)
Second picture
-1EV
(Darker)
Third picture
+1EV
(Brighter)
and 'BURST' are canceled.
EXPOSURE only
49
VQT1Z82