Panasonic DMC-ZS3 Operating Instructions Manual page 63

Using a card of SD speed 'Class 6' or above is recommended for recording motion
pictures.
The SD speed class is a speed rating for continuous writing.
Using a high-speed card with a specified speed (e.g. on packaging) of at least 10 MB/s
is recommended when 'REC QUALITY' is set to 'HD', 'WVGA', or 'VGA'.
A maximum of approx. 2 GB of continuous motion pictures can be recorded in MOTION
JPEG format. (Even if there is more than 2 GB of available space on the card, the
available recording time will be calculated for a maximum of 2 GB.) To record more than
2 GB, press the motion picture button again. In AVCHD Lite format, recording may be
continued until the card is full.
If data is repeatedly recorded and deleted, the total available recording time on the SD
card may be reduced. To restore the original capacity, use the camera to format the
SD card. Be sure to save all important data to your computer or other media before
formatting, as all data saved to the card will be erased.
Do not block the microphone with your fingers.
Immediately release the motion picture button after pressing it. No audio will be
recorded for a few seconds after recording is started if the button is held down.
Sounds of camera operations, such as zoom movement and beeps may be recorded.
The zoom speed is slower than normal.
STABILIZER is fixed at 'MODE1' regardless of the setting before motion picture
recording.
To fix the focus setting, set 'CONTINUOUS AF' to 'OFF'.
The following functions are not available.
Extended optical zoom, flash, FACE RECOG., 'NATURAL' and 'VIVID' in 'COLOR
MODE', ROTATE DISP. for pictures taken vertically
Recording automatically ends when there is no more available space. For certain
memory cards, recording may end while in progress.
MultiMediaCards are not supported.
The screen can become narrower in motion pictures compared to pictures. The
recordable area is displayed by setting 'REC AREA' (P.22) to 'ON'.
If extended optical zoom was used before pressing the motion picture button, these
settings will be cleared, and the recordable area will be larger.
'QVGA' in 'REC QUALITY' (P.80) only can be recorded to the built-in memory.
If power is lost while using the AC adaptor to record a motion picture (e.g. power
failure, cable disconnection, etc), the motion picture being recorded will be lost. Using a
sufficiently-charged battery in conjunction with the AC adapter is recommended.
Fast-moving objects in motion pictures may appear blurred during playback.
Downloaded From camera-usermanual.com Panasonic Manuals
63
VQT1Z82