Starting The Engine - Toro Recycler 20793 Operator's Manual

Figure 19
Starting the Engine (Model
20793)
1. Push the ignition toggle switch to the On (I) position
(Figure 20).
Figure 20
1. Ignition toggle switch
2. Firmly push in the primer 3 times with your thumb,
holding the primer in for a second before releasing it
each time (Figure 21).
Figure 21
Note: If the air temperature is below 55°F (13°C),
firmly push the primer in 5 times.
3. Pull the recoil starter (Figure 22).
Figure 22
4. If the mower does not start in 1 or 2 pulls, press the
primer button 1 or 2 times and try starting it again.
Note: If the mower still does not start, contact an
Authorized Service Dealer.
Starting the Engine (Model
20795)
1. Firmly push in the primer 3 times with your thumb,
holding the primer in for a second before releasing it
each time (Figure 23).
Figure 23
Note: If the air temperature is below 55°F (13°C),
firmly push the primer in 5 times.
2. Start the engine in one of 2 ways:
•
Turn the ignition key to the Start position; when the
engine starts, release the key (Figure 24).
Figure 24
•
Turn the ignition key to the Run position and pull
the recoil starter in the operating position (Figure
25).
10