Figure 102
1. Clutch pulley
2. Mower belt
3. Spring-loaded idler pulley
4. Ratchet
7. Remove and retain the hardware on both sides of the
deck as shown in
Figure
5. Square hole in the idler
arm for the ratchet
6. Idler grease fitting
7. Belt guide
103.
1. Right stabilizer
2. Deck strut (right side shown)
3. Remove the shoulder bolt and nut.
4. Remove the shoulder bolt and nut.
8. Raise the deck struts and secure them in the up
position.
9. Slide the deck out to the right side of the machine.
66
Figure 103