6.34. Remove the G-Board, GH-
Board and GK-Board
1. Remove the front bracket. (See section 6.33.)
2. Remove the screws (×3
cover.
3. Remove the screws (×5
4. Remove the screws (×1
holder.
5. Remove the screws (×4
(G3-GK3).
6. Remove the G-Board and GH-Board.
7. Release the control button claws (×2
8. Remove the GK-Board.
) and remove the front bracket
).
) and remove the terminal shield
) and disconnect the couplers
).
6.35. Remove the GS-Board
1. Remove the Shield cover (B). (See section 6.16.)
2. Remove the screws (×3
3. Remove the SD card unit.
4. Remove the screws (×2
5. Disconnect the coupler (G52).
6. Remove the GS-Board.
19
TH-65PX600U
).
).