TH-65PX600U
6. Release the DT-Board shield case body claws (×6
7. Remove the DT-Board.
6.9.
Remove the DG-Board
1. Remove the DT-Board unit. (See section 6.8.)
2. Remove the screws (×8
metal frame.
).
3. Disconnect the couplers (DG2, DG3 and DG5).
4. Disconnect the flexible cables (DG1, DG11 and DG20).
5. Remove the screw (×1
12
) and remove the DT-Board
) and remove the DG-Board.