Replace The Plasma Panel (Finished) - Panasonic TH-65PX600U Service Manual

4. For leaving the plasma panel from the front frame, pull the
bottom of the front frame forward, lift, and remove.
6.38. Replace the plasma panel
(finished)
1. Place the new plasma panel (finished) on the flat surface of
the table (covered by a soft cloth), with the plasma panel
surface facing downward.
2. Attach the C1, C2, C3,C4,C5-Board and the C6-Board,
connect the flexible cables (×30) from the Plasma panel to
the C1, C2, C3,C4,C5-Board and the C6-Board, and fit the
flexible cable holders.
3. Attach the Hooks (left, right) and fit the Reinforcement
Angles (L, R) and the Connection Plate (A, B, C, D) to the
new plasma panel.
4. Place the plasma panel section on the servicing stand.
5. Place the spacers and spacer rings (×12).
6. Attach the front frame and each P.C.Board and so on, to
the new plasma panel.
* When fitting the front frame, be careful to allow any debris,
dust or handling residue to remain between the front glass and
plasma panel.
21
TH-65PX600U