Table of Contents
Advertisement
6.6.
Remove the P-Board
Caution:
To remove P.C.B. wait 1 minute after power was off for
discharge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable.
2. Disconnect the couplers (P2, P5, P9, P10, P11, P12, P23,
and P25).
3. Remove the screws (×5
Board.
6.7.
Remove the PA-Board
1. Unlock the cable clampers to free the cable.
2. Disconnect the couplers (PA1, PA2, PA5, PA10, PA31,
PA32, PA33, PA34 and PA40).
3. Disconnect the flexible cable (PA20).
4. Remove the screws (×4
5. Remove the PA-Board.
, ×1
) and remove the P-
) and remove the earth cable.
TH-42PV600AZ / TH-42PV600H / TH-42PV600M / TH-42PV600MT
6.8.
Remove the tuner unit
1. Unlock the cable clampers to free the cable.
2. Disconnect the couplers (DG5, G51 and PA40).
3. Disconnect the flexible cables (DG3 and PA20).
4. Remove the screws (×4
6.9.
Remove the DG-Board
1. Disconnect the coupler (DG2).
2. Disconnect the flexible cables (DG1, DG15 and DG20).
3. Remove the screw (×7
11
) remove the tuner unit.
) remove the DG-Board.
Advertisement
Table of Contents
