Digi-Trac™ Control System Error Messages - Titan IMPACT 1640 Owner's Manual

Digi-Trac™ control System Error
Messages
The following error message screens appear whenever the Digi-
Trac™ Control System detects a problem with the sprayer. Once
a problem occurs and the error message appears, the sprayer
will shut down.
Before proceeding, follow the Pressure Relief
Procedure outlined previously in this manual.
additionally, follow all other warnings to reduce the
risk of an injection injury, injury from moving parts
or electric shock. always unplug the sprayer
before servicing!
check Transducer Screen
The Check Transducer screen appears
when the transducer has become
disconnected or is defective. Take the sprayer to a Titan
authorized service center for repair.
check Potentiometer Screen
The Check Potentiometer screen
appears when the potentiometer has
become disconnected or is defective. Take the sprayer to a Titan
authorized service center for repair.
Low voltage Screen
The Low Voltage screen appears when
the sprayer shuts down because of low
input voltage. Check the power supply and correct the problem.
Restart the sprayer by following the "Painting" procedure in the
Operation section of this manual.
high Motor Temperature Screen
The High Motor Temperature screen
appears when the temperature of the
motor has risen too high. Take the sprayer to a Titan authorized
service center for repair.
high control Temperature Screen
The High Control Temperature screen
appears when the temperature of
the Digi-Trac has risen too high. Take the sprayer to a Titan
authorized service center for repair.
high Mechanical Load
The High Mechanical Load screen
appears when the sprayer shuts down
because of high current or when the sprayer goes into current
fold back mode. Take the sprayer to a Titan authorized service
center for repair.
© Titan Tool Inc. All rights reserved.
CHECK TRANSDUCER
CHECK
POTENTIOMETER
LOW VOLTAGE
HIGH MOTOR
TEMPERATURE
HIGH CONTROL
TEMPERATURE
HIGH MECHANICAL
LOAD
15 English English