Servicing The Bedbar - Toro 04038 Operator's Manual

Rollers: Standard and Optional
Part Number
99-6241
88-6790
104-2642
71-1550
93-9045
52-3590
93-9039
95-0930
Clip Table for Fixed-Head Walk-Behind Greensmowers
Model
Standard reel
11–blade
04038 3.8 mm (0.15
inches)
11–blade
04039 4.1 mm (0.16
inches)
Ground speed

Servicing the Bedbar

Removing the Bedbar
1. Turn the bedbar adjuster screw counterclockwise to
back the bedknife away from the reel
Figure 55
1. Bedbar adjusting screw
2. Spring tension nut
2. Back out the spring tension nut until the washer is no
longer tensioned against the bedbar
3. On each side of the machine loosen the jam nut
securing the bedbar bolt
Description
Narrow Wiehle
Wide Wiehle
Full Roller
Wiehle Roller
Wiehle Roller
Swaged Roller
Narrow Wiehle
Full Roller
Standard
Optional reel
14–blade
3.0 mm (0.12
inches)
(Figure 55).
3. Bedbar
(Figure 55).
(Figure 56).
Mower Diameter/Material
Greensmaster 1010 2.0 inches Aluminum
Greensmaster 1010 2.0 inches Aluminum
Greensmaster 1010
Greensmaster 1010 2.0 inches Cast Iron
2.5 inches Aluminum
Greensmaster 1010
Greensmaster 1010 2.5 inches Aluminum
Greensmaster 1610 2.5 inches Aluminum
Greensmaster 1610
Standard reel
8–blade 11–blade
5.1 mm (0.20 5.6 mm (0.22
inches) inches)
8–blade 11–blade
5.8 mm (0.23 5.6 mm (0.22
inches) inches)
4.80 km/h (2.98 mph)
1. Jam nut
4. Remove each bedbar bolt allowing the bedbar to be
pulled downward and removed from the machine. Save
the 2 nylon and 2 stamped steel washers on each end
of the bedbar
Installing the Bedbar
1. Install the bedbar, positioning the mounting ears
between the washer and the bedbar adjuster.
2. Secure the bedbar to each side plate with the bedbar
bolts (jam nuts on the bolts) and 8 washers. Position a
nylon washer on each side of the side plate boss. Place
a steel washer outside each of the nylon washers.
3. Torque the bolts to 27 to 36 N-m (240 to 320 inch-lb).
36
Comments
Standard, 0.2 Spacing
More Penetration, 0.43
Spacing
2.0 inches Steel Least Penetration
More Penetration, 0.43
Spacing
24 inches Wide for Edge
Support
Standard
Least Penetration
2.5 inches Steel
Clip Kit 65–9000
Optional reel
14–blade
4.3 mm (0.17
inches)
1
Figure 56
2. Bedbar bolt
(Figure 56).
8–blade
7.6 mm (0.30
inches)
8–blade
7.6 mm (0.30
inches)
2
g014780