Figure 2-4 Networking Diagram For Configuring Traffic Policing Based On A Traffic Classifier - Huawei Quidway S9300 Configuration Manual

2 Traffic Policing and Traffic Shaping Configuration

Figure 2-4 Networking diagram for configuring traffic policing based on a traffic classifier

Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
5.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
Procedure
Step 1 Create VLANs and configure interfaces.
# Create VLAN 100, VLAN 110, VLAN 120, VLAN 200, VLAN 210, and VLAN 220 on the
S9300.
2-24
VLAN
100
LSW
Enterprise
users
VLAN
VLAN
110
120
Create VLANs and configure interfaces so that enterprise and individual users can access
the network through the S9300.
Create traffic classifiers based on the VLAN ID on the S9300.
Configure QoS CAR on the S9300 to police the incoming and outgoing traffic of enterprise
and individual users.
Create traffic behaviors on the S9300 to police the traffic received from the user side and
re-mark DSCP priorities of packets, and police the traffic sent to the user side.
Create traffic policies on the S9300, bind traffic behaviors to traffic classifiers in the traffic
policies, and apply the traffic policies to the interfaces that packets pass through.
Re-marked priorities of packets with different VLAN IDs
Parameters for packets with different VLAN IDs: CIR and PIR
Type, direction, and number of the interface on which a traffic policy needs to be applied
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Core network
GE 2/0/1
GE 1/0/1
GE 1/0/2
S9300
LSW
VLAN
220
Quidway S9300 Terabit Routing Switch
Configuration Guide - QoS
VLAN
200
Individual
VLAN
users
210
Issue 03 (2009-08-20)