Class-Based Qos Configuration - Huawei Quidway S9300 Configuration Manual

Terabit routing switch

Hide thumbs Also See for Quidway S9300:

Table of Contents

Quidway S9300 Terabit Routing Switch

Configuration Guide - QoS

About This Chapter

This chapter describes the basic concepts of the traffic classifier, traffic behavior, traffic policy,

DiffServ domain, and priority mapping, and configuration methods and configuration examples

of the traffic policy based on complex traffic classification and priority mapping based on simple

traffic classification.

1.1 Introduction to Class-based QoS

This section describes the basic concepts of the Class-based QoS.

1.2 Class-based QoS Features Supported by the S9300

This section describes the Class-based QoS features supported by the S9300.

1.3 Configuring Priority Mapping Based on Simple Traffic Classification

This section describes how to configure priority mapping based on simple traffic classification.

1.4 Configuring Complex Traffic Classification

This section describes how to configure complex traffic classification.

1.5 Creating a Traffic Policy Based on Complex Traffic Classification

This section describes how to create a traffic policy based on complex traffic classification.

1.6 Maintaining Class-based QoS

This section describes how to maintain class-based QoS.

1.7 Configuration Examples

This section provides several configuration examples of class-based QoS.

Issue 03 (2009-08-20)

Class-based QoS Configuration

Huawei Proprietary and Confidential

1 Class-based QoS Configuration

1-1

Table of Contents