Advertisement
Note:
G
For non-rewireable plugs the fuse
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
G
If a non-rewireable plug is cut off it
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable pug is inadvertently
inserted into a 13A socket outlet.
G
The machine complies with
European Economic Community
Directive 89/336/EEC.
before using for the first time
1 Remove all the packaging .
2 Wash the parts: see 'cleaning'.
3 Push excess cord into the back of
the appliance.
key
stirrer
cap
lid
goblet
tap assembly
sealing ring
blade assembly
power unit
to use your smoothie
blender
1 Fit the sealing ring over the blade
assembly.
2 Screw the goblet onto the blade
unit.
3 Screw the tap assembly onto the
goblet, then place on the power unit.
G
Check that the dispensing tap lever
is in the off position
4 Place the liquid ingredients into the
goblet.
.
3
G
This includes fruit (not frozen), fresh
yoghurt, milk and fruit juices. These
can be placed into the goblet to the
level marked LIQUIDS for either 3 or
6 servings.
5 Add ice or frozen ingredients to the
goblet.
G
This includes frozen fruit, frozen
yoghurt, ice cream or ice. These can
be added up to the level marked
FROZEN INGREDIENTS for the
corresponding number of servings.
6 Push the lid onto the goblet.
7 Either push the cap into the lid or
place the stirrer in the hole.
G
The stirrer can be used when
blending thick mixtures or when
large quantities of frozen items are
used.
8 Press the MIX button for up to 30
seconds, this is to start the mixing
process, then press the SMOOTH
button. Allow the ingredients to
blend until smooth.
G
Use the stirrer by moving it in an anti
clockwise direction.
9 Place a glass under the tap, press
the MIX button and press down on
the dispensing tap lever.
G
Thinner drinks may dispense without
having to switch on the power unit.
G
Use the stirrer to assist when
dispensing thick smoothie drinks.
G
To help dispense the last amount of
a thick smoothie drink, add a few
tablespoons of liquid to increase the
flow.
10 When the glass is full, release the
lever and switch off.
hints
G
To make a thinner smoothie drink
add more liquid.
G
To make a thicker smoothie drink
add more frozen ingredients.
G
Before fitting the lid, push the solid
ingredients into the liquid using the
stirrer.
Advertisement
