Useful adjustment settings
DVI input signal setting
Selecting input source
Use this menu to select the input source.
Press INPUT to select INPUT5.
l
!Xl
Virtual
MENU
a~.
'.1
Display
INPUT
•
CIIJ CIIJ
~
0
- VOL
+
v
CH A
IN' I UT
POWER
INPUT button
Jr
CARD
"ftJ
(JC;:
MUTE
aU
v
a
Press INPUT.
• A list of selectable sources appears.
Press INPUT again to select the input source.
• An
image from
the
selected
source
automatically displays.
• You can also select the input source by
pressing ..
IT.
• If the corresponding input is not plugged in,
you cannot change the input. Be sure to
connect the equipment beforehand.
Press MENU and the MENU screen displays.
Press .....
/~
to select "Option".
Press
J../T
to select "Input Select", and then
press ENTER.
Selecting input signal type
For setting the signal type of external equipment
connected to INPUT 1, Input 2 or 5 terminals.
Press MENU and the MENU screen displays.
Press
.....-/~
to select "Option".
Press
J../T
to select "Input Select", and then
press ENTER.
Press
J../T
to select a signal type you want
to set, and then press ENTER.
• If the selected signal type is incorrect, an image
does not display or no color image displays.
Press
J../Tto
select the equipment
connected to INPUT 5 terminal, and then
press ENTER.
• If you set INPUT1 and INPUT2 to Auto, the TV will
automatically select the input signal.
• Check the operation manual of the external equipment
for the signal type.
• Setting INPUT 1 and INPUT 2 signal selection to "Auto"
when other equipment is connected will result in the
following connectivity priority.
1. COMPONENT VIDEO
2. VIDEO
@-55