Table of Contents
Advertisement
Using external equipment
You can use the INPUT 4 terminal when connecting an HOMI equipment.
HOMI cable
(Commercially available)
HOMI equipment
Set whether or not to use
VIEW MODE based on
signal recognition,
including an HDMI signal.
Select the signal amplitude
range. Normally, select
Standard.
Auto/ITU601/
Select the internal color
ITU709
space conversion method
when an RGB signal is
input. Normally, select
Auto.
Auto/RGB/YCbCr
Select the signal type from
4:4:4/YCbCr 4:2:2
an HDMI terminal. Unless
the image quality looks
obviously poor, select Auto.
Press
~/T
/......
/~
to select the desired setting
and press ENTER.
Press
~/T
to select the desired item and
press ENTER.
Auto View Enable/Disable
Dynamic
Standard/
Range
Out of standard
Color
Matrix
Signal
Type
• Refer to your external equipment operation manual for
the signal type.
Press
~/T
to select "HOMI Setup", and then
press ENTER.
Press ......
/~
to select "Option".
Press MENU and the MENU screen displays.
To watch an HOMI equipment image, select
"INPUT4" from "INPUT SOURCE" menu
using INPUT on the remote control unit or
on the TV. (See page 55.)
@-49
Advertisement
Table of Contents
