Sharp LC-26G4U Operation Manual page 42

Using memory card
Press CARD and the card mode screen
displays.
Press
1lIIIIII/~
to select "Video", and then press
ENTER.
CARD
A. .
( Jc~
MUTE
• v
v
0
Press
./T/1lIIIIII/~
to select the file you want
to play, and then press ENTER.
• Video playback starts .
I)[]
Virtual
o
MENU
-
Press CARD again to display the operation
panel.
• See page 36 for the operation panel
information.
• When viewing a motion picture, by pressing
VIEW MODE the picture size changes.
Small - Medium - Large.
Use this setting to record images you are currently
watching.
Record with the settings made in "Rec. Mode" and
"Pre Record".
Press REC to start recording.
• CARD indicator lights up red.
• Recording information displays in the lower
right corner of the screen.
Press. to stop recording.
The list of broadcasting type or input signal not available
for recording:
CD
COMPONENT input
e.g)
HDMI input
@
DVI-I input
®
Card picture
@
Copy guarded signal
@
V-chip blocked program
To display the remaining record time.
Press DISPLAY while not recording.
• Remaining record time displays in the lower right corner
of the screen.
• Do not press POWER on the display while recording.
Recording cannot finish properly and may damage the
file.
• Recording stops if you press POWER on the remote
control while recording.
• When card has no capacity for recording, "Card is full"
displays and stops recording.
• You cannot change the channel or switch the input source
while recording.
@-41