Table of Contents
Advertisement
Basic adjustment settings
For viewing a video in monochrome.
Adjusting the image and input signal can give you a
more beautiful picture.
Press MENU and the MENU screen displays.
Repeat steps 1 to 3 in Monochrome.
Press
~/~
to select "Picture".
Press
./T
to select "I/P Setting", and then
press ENTER.
Press
~/~
to select "I nterlace" or
"Progressive", and then press ENTER.
• liP Setting is set to Progressive when Film Mode is "On".
• "liP Setting" is not selectable when channel display shows
an input resolution of 480P, 720P or 10801.
Press
./T
to select "Monochrome", and
then press ENTER.
Press
./T
to select "Advanced", and then
press ENTER.
Press
~/~
to select "On", and then press
ENTER.
For viewing in monochrome
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyzes it then
recreates each still film frame for high-definition picture
quality.
Repeat steps 1 to
3
in Monochrome.
Press
./T
to select "Film Mode", and then
press ENTER.
Press .....
/~
to select "On", and then press
ENTER.
Normal viewing mode
Detects, analyzes, converts film source
@-31
Advertisement
Table of Contents
