Digital Noise Reduction; Audio Only - Sharp LC-26G4U Operation Manual

Useful adjustment settings
• Some input signals may have to be registered manually
to display properly.
• The pairs of input signals (resolutions) in the list below
are not distinguishable when received. In such case, you
have to set the correct signal manually. After setting once,
it will display when the same signal (resolution) is input
again.
640x400 720x400
640x480
848x480
1024x 768 1280x 768
Produces a clearer video image.
Press MENU and the MENU screen displays.
Press
~/~
to select "Option".
Press ..
IT
to select "Digital Noise
Reduction", and then press ENTER.
• You can only select the "Input Signal" on the Setup menu
when receiving one of the 6 input signals listed above.
I)(JVirtual MENU
o
EI
FAVORITE CH
0-----®----@---
Press ..
IT
to select the desired level, and
then press ENTER.
Press MENU and the MENU screen displays.
Press
~/~
to select "Setup".
Press ..
IT
to select "Input Signal" and then
press ENTER.
When listening to music from a music program, you
can set the display off and enjoy audio only.
Repeat steps 1 and 2 in Digital Nois'e
Reduction.
Press ..
IT
to select "Audio Only", and then
press ENTER.
Press ..
IT
to select the desired input signal
on the display.
Example
On
Off
Press
~/~
to select "On", and then press
ENTER.
Audio is output without screen image.
Both screen images and audio are output.
@-S9