Table of Contents
Advertisement
Watching TV
•
Example
Press
~/~
to select "Yes" for ANT-A, then
press ..
IT
to move down.
Press
~/~
to select "Yes" for ANT-B, then
press ..
IT
to move down to select "Search
Start" , and press ENTER.
Channel search
Channel auto search makes the TV look for all channels
viewable in the set area.
•
Press
~/~
to select "Air" or "Cable" for ANT-
A, then press ..
IT
to move down.
Press
~/~
to select "Air" or "Cable" for ANT-
B.
Press ENTER to enter the setting.
• This operation makes the TV search for both
ANT-A and B.
• There are 3 kinds of CATV system, including
Standard, HRC and IRC. Select the one
matches to your TV. Select Auto when you do
not know which one to select.
Example
Press ..
IT
to select the desired language
listed on the screen, and then press ENTER.
Antenna setting
Make sure what kind of connection is made with your TV
when selecting "Air" or "Cable" for both ANT-A and B.
When you turn on the TV for the first time, it will automatically memorize the broadcasting channels where you
live. Perform the following steps before you press TV POWER on the remote control unit.
1. I nsert the batteries into the remote control unit. (See page 11.)
2. Connect the antenna cable to the TV. (See pages 15 to 17.)
3. Plug in the AC cord to the AC outlet. (See page 8.)
Language setting
Select from among 3 languages: English, French and
Spanish.
• Make sure what kind of connection is made with your TV
when selecting "Air" or "Cable" for both ANT-A and B.
• If no channel is found, make sure what kind of connection
is made with your TV and try EZ setup again (see page
24).
@-19
Advertisement
Table of Contents
