Dell 2400mp Owner's Manual page 20

3
Keystone adjustment
4
Resync
5 Menu
6
TEMP warning light
7
LAMP warning light
8
Enter
9
Keystone adjustment
10 Up
11
and
20 Using Your Projector
Downloaded From projector-manual.com DELL Manuals
Press to adjust image distortion caused by tilting
the projector. (±40 degrees)
Press to synchronize the projector to the input
source. Resync does not operate if the on-screen
display (OSD) is displayed.
Press to activate the OSD. Use the directional
keys and Menu button to navigate through the
OSD.
• A solid orange TEMP light indicates that the
• A blinking orange TEMP light indicates that a
If the LAMP light is solid orange, replace the
lamp. If the LAMP light is blinking orange, the
system has failed and the projector will
automatically shut down. If this problem persists,
contact Dell.
Press to confirm the selection item.
Press to adjust image distortion caused by tilting
the projector. (±40 degrees)
and Down Press to select the OSD items.
buttons Press to adjust the OSD setting.
projector has overheated. The display
automatically shuts down. Turn the display on
again after the projector cools down. If the
problem persists, contact Dell.
projector fan has failed and the projector
automatically shuts down. If the problem
persists, contact Dell.