Dell 2400mp Owner's Manual page 35

Problem
The image is stretched when
displaying a 16:9 DVD
Image is reversed
Lamp is burned out or makes
a popping sound
LAMP light is solid orange
LAMP light and Power light
are blinking orange
LAMP light is blinking
orange and Power light is
solid blue
TEMP light is solid orange
and Power light is solid blue
Downloaded From projector-manual.com DELL Manuals
(continued) (continued)
Possible Solution
The projector automatically detects a 16:9
DVD and adjusts the aspect ratio to full
screen with a 4:3 (letter-box) default setting.
If the image is still stretched, adjust the aspect
ratio as follows:
• If you are playing a 16:9 DVD, select 4:3
aspect ratio type on your DVD player.
• If you cannot select 4:3 aspect ratio type on
your DVD player, select 4:3 aspect ratio in
the Set Up menu in the OSD.
Select Set Up from the OSD and adjust the
projector mode.
When the lamp reaches its end of life, it may
burn out and may make a loud popping sound.
If this occurs, the projector does not turn back
on. To replace the lamp, see on page 37.
If the LAMP light is solid orange, replace the
lamp.
If the LAMP light and the Power light are
blinking orange, the lamp driver has failed and
the projector will automatically shut down.
Unplug the power cord after 3 minutes then
turn the display on again. If this problem
persists, contact Dell.
If the LAMP light is blinking orange and
Power light is solid blue, the system has failed
and the projector will automatically shut
down. Unplug the power cord after 3 minutes
then turn the display on again. If this problem
persists, contact Dell.
The lamp has overheated. The display
automatically shuts down. Turn the display on
again after the projector cools down. If the
problem persists, contact Dell.
Troubleshooting Your Projector 35