Care And Maintenance - Doro 824 User Manual

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio com-
munications. However, there is no guarantee that interference will not occur in a particu-
lar installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is en-
couraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
•
Connect the equipment to an outlet on a circuit different from that to which the re-
ceiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The FCC can require you to stop using your unit if such interference cannot be
eliminated.
Doro has not approved any changes or modifications to this device by the user. Any
changes or modifications could void the user's authority to operate the equipment.

Care and maintenance

Your unit is a technically advanced product and should be treated with the greatest care.
Negligence may void the warranty.
• Protect the unit from moisture. Rain, snow, humidity, and all types of liquids can
contain substances that corrode the electronic circuits. If the unit gets wet, you
should immediately power off the phone, remove the battery and allow the unit to
dry completely before you replace it.
• Do not use or keep the unit in dusty, dirty environments. The unit's moving parts
and electronic components can be damaged.
• Do not keep the unit in warm places. High temperatures can reduce the lifespan
for electronic equipment, damage batteries and distort or melt certain plastics.
•
Do not keep the unit in cold places. When the unit warms up to normal tempera-
ture, condensation can form on the inside and can damage the electronic circuits.
•
Do not try to open the unit in any other way than that which is indicated here.
•
Do not drop or shake the unit. If it is treated roughly the circuits and precision me-
chanics can be broken.
•
Do not use strong chemicals to clean the unit.
• Maintain the battery and phone during operation between 32 °F–105 °F. If the
phone and battery become too warm or too cold, the phone and battery may not
work temporarily, even if the battery is fully charged. Subjecting the phone and bat-
tery to excessive temperatures can create a safety hazard resulting in fire, explo-
sion or other hazards.
•
Do not disassemble, open, crush, bend, deform, puncture or shred.
English (US)
71