Shutter Release Function
Use the YN-622N transceiver for wireless transmitting, the
YN-622N-TX controller as the shutter signal output.
1).Install the YN-622N-TX controller on the camera's hot shoe,
and use LS-2.5 series shutter connecting cable(may
additional purchases) to connect the controller and camera.
2).Long press the [TEST] button of YN-622N transceiver to
focus, loosen the [TEST] button to shot. If the flash installed
o n t h e Y N - 6 2 2 N t r a n s c e i v e r, t h e f l a s h w i l l f i r e
synchronously.
Support single shot only.
If the controller does not installed on the compatible
camera's hot shoe, the shutter will release when pressing
the [TEST] button of transceiver.
The compatible shutter release cable list:
LS-2.5/N1:
D200/D300/D300S/D700/D800
LS-2.5/N3:
D90/D600/D3100/D3200/D5000Series/D7000Series
LS-2.5/N2(Optional):
D70/D70S/D80