Toyota tundra 2016 User Manual page 65

Installing child restraints using a seat belt (child restraint lock
function belt)
Rear-facing (Regular Cab models)  Infant seat/convertible
■
seat
Never install a rear-facing child restrain. Your vehicle is not
designed to carry and infant.
Rear-facing (Double Cab and CrewMax models)  Infant seat/
■
convertible seat
1
Place the child restraint sys-
tem on the seat facing the
rear of the vehicle.
2
Run the seat belt through the
child restraint system and
insert the plate into the
buckle. Make sure that the
belt is not twisted.
3
Fully extend the shoulder belt
and allow it to retract to put it
in lock mode. In lock mode,
the belt cannot be extended.
1-1. For safe use
I n f o r ma t i o n P r o v i d e d b y :
65
1