4-2. Driving Procedures; Engine (Ignition) Switch - Toyota tundra 2016 User Manual

182

4-2. Driving procedures

Engine (ignition) switch

Starting the engine
1
Check that the parking brake is set.
2
Check that the shift lever is set in P.
3
Firmly depress the brake pedal.
4
Turn the engine switch to the "START" position to start the engine.
Changing the engine switch positions
1
"LOCK"
The steering wheel is locked and
the key can be removed. (The key
can be removed only when the
shift lever is in P.)
2
"ACC"
Some electrical components such
as the audio system can be used.
3
"ON"
All electrical components can be used.
4
"START"
For starting the engine.
■
Turning the key from "ACC" to "LOCK"
1
Shift the shift lever to P.
2
Push in the key and turn it to the
"LOCK" position.
■
If the engine does not start (vehicles with engine immobilizer system)
The engine immobilizer system may not have been deactivated. (P. 78)
Contact your Toyota dealer.
I n f o r ma t i o n P r o v i d e d b y :